Rohde & Schwarz 1402.9557.02 Operating Manual Download Page 31

Page: 31 / 80

DVB-H User Interface

DVB-H

Operating Manual 1008.0970.12 ─ 16

3.4 Filter / Clipping Settings

► To access this dialog, select "Main dialog > Filter/Clipping/ARB Settings".

The dialog comprises the settings, necessary to configure the baseband filter and
to enable clipping.

3.4.1 Filter Settings

Provided are the following settings:

Filter

Selects the baseband filter.

Remote command:

[:SOURce<hw>]:BB:DVB:FILTer:TYPE

on page 53

Roll Off Factor or BxT

Sets the filter parameter.

The filter parameter offered ("Roll Off Factor" or "BxT") depends on the currently
selected filter type. This parameter is preset to the default for each of the predefined
filters.

Remote command:

[:SOURce<hw>]:BB:DVB:FILTer:PARameter:APCO25

on page 51

[:SOURce<hw>]:BB:DVB:FILTer:PARameter:COSine

on page 51

[:SOURce<hw>]:BB:DVB:FILTer:PARameter:GAUSs

on page 51

[:SOURce<hw>]:BB:DVB:FILTer:PARameter:PGAuss

on page 52

[:SOURce<hw>]:BB:DVB:FILTer:PARameter:RCOSine

on page 53

[:SOURce<hw>]:BB:DVB:FILTer:PARameter:SPHase

on page 53

Filter / Clipping Settings

Summary of Contents for 1402.9557.02

















































































Search results

Summary of Contents for 1402.9557.02

Reviews:

Related manuals for 1402.9557.02

Brands by name

Popular brands

Rohde & Schwarz 1402.9557.02, Operating Manual

Search results

Summary of Contents for 1402.9557.02

Reviews:

Related manuals for 1402.9557.02

Brands by name

Popular brands