Rohde & Schwarz 1402.9557.02, Operating Manual

Page: 52 / 80

Remote-control commands DVB-H
52 Operating Manual 1008.0970.12 ─ 16
Parameters:
<Gauss> float
Range:
0.15 to 2.5
Increment: 0.01
*RST:
0.5
Example: BB:DVB:FILT:PAR:GAUS 0.5
sets B x T to 0.5 for the Gauss filter type.
Manual operation: See "Roll Off Factor or BxT" on page 31
[:SOURce<hw>]:BB:DVB:FILTer:PARameter:LPASs <LPass>
The command sets the cut off frequency factor for the Lowpass (APC opt.) filter type.
Parameters:
<LPass> float
Range:
0.05 to 2
Increment: 0.01
*RST:
0.5
Example: BB:DVB:FILT:PAR:LPAS 0.5
the cut off frequency factor is set to 0.5.
Manual operation: See "Cut Off Frequency Factor" on page 32
[:SOURce<hw>]:BB:DVB:FILTer:PARameter:LPASSEVM <LPassEvm>
The command sets the cut off frequency factor for the Lowpass (EVM opt.) filter type.
Parameters:
<LPassEvm> float
Range:
0.05 to 2
Increment: 0.01
*RST:
0.5
Example: BB:DVB:FILT:PAR:LPAS 0.5
the cut off frequency factor is set to 0.5.
Manual operation: See "Cut Off Frequency Factor" on page 32
[:SOURce<hw>]:BB:DVB:FILTer:PARameter:PGAuss <PGauss>
The command sets the B x T for the Pure Gauss filter type.
Parameters:
<PGauss> float
Range:
0.15 to 2.5
Increment: 0.01
*RST:
0.5
General Commands