Commissioning
R&S
®
TS-PCA3
50
User Manual 1152.3908.12 ─ 19
Figure 4-4: Adaption of a Short PXI Module to the Adapter Interface (Example)
4.5.5
External Cabling
External cabling is used to connect measuring and stimuli devices as well as the UUT
to the R&S TS-PCA3.
Implementing the following concept should ensure the clarity of external cabling
design:
●
The cabling to UUT is at the front of the R&S TS-PCA3.
The UUT adapter is located here; an adapter interface can also be flange mounted
if required.
●
The cabling to measuring and stimuli devices is at the rear of the TSVP.
System and user-specific terminals and plug and socket connectors can be fitted in
the back for this purpose (see
).
This concept ensures a high degree of clarity, rapid adaption to different test tasks and
allows the simple replacement of plug-in modules.
Cabling