Rohde & Schwarz 1152.2518.02, User Manual, Page: 49 / 91

Commissioning
R&S
®
TS-PCA3
47 User Manual 1152.3908.12 ─ 19
4.4.3 Connections at the Front
Figure 4-2: Front Connections
1 = Slot (16)
The Produktionstestplattform R&S TS-PCA3 has no connections in its basic configura-
tion. The existing slots can be fitted with system and user-specific plug-in modules and
connections.
4.5 Cabling
4.5.1 Concept
The Produktionstestplattform R&S TS-PCA3 offers comprehensive opportunities for
inner, internal and external cabling:
●
Inner cabling : Cabling by bus systems permanently installed in the R&S TS-
PCA3.
–
PXI Trigger Bus
– CAN Bus
– Analog bus on separate backplane
●
Internal cabling : Cabling inside the case of the R&S TS-PCA3. Here, plug-in mod-
ules are connected with connectors used in the R&S TS-PCA3 case:
–
Cabling of the analog bus
– Cabling of cPCI/PXI modules to the adapter interface
– Cabling of cPCI/PXI modules to rear connectors
– Cabling of special cPCI/PXI modules to each other
Cabling