background image

1007.8684.14-03.00

Customer Support

Technical support – where and when you need it

For quick, expert help with any Rohde & Schwarz equipment, contact one of our
Customer Support Centers. A team of highly qualified engineers provides telephone
support and will work with you to find a solution to your query on any aspect of the
operation, programming or applications of Rohde & Schwarz equipment.

Up-to-date information and upgrades

To keep your Rohde & Schwarz equipment always up-to-date,
please subscribe to an electronic newsletter at

http://www.rohde-schwarz.com/www/response.nsf/newsletterpreselection

or request the desired information and upgrades via email from your Customer Support
Center (addresses see below).

Feedback

We want to know if we are meeting your support needs.  If you have any comments
please email us and let us know 

CustomerSupport.Feedback@rohde-schwarz.com

.

USA & Canada

Rest of World

Monday to Friday 

(except US-state holidays)

8:00 AM – 8:00 PM 

Eastern Standard Time (EST)

Monday to Friday 

(except German-state holidays)

08:00 – 17:00 

Central European Time (CET)

USA:  

888-test-rsa (888-837-8772) (opt 2)

From outside USA: +1 410 910 7800 (opt 2)
Fax: 

410 910 7801

E-Mail: 

[email protected]

49 (0) 180 512 42 42
From outside Europe: +49 89 4129 13776
Fax:

+49 (0) 89 41 29 637 78

E-Mail: 

[email protected]

Summary of Contents for 1150.0801.02

















Reviews: