2)
Remove Shipping Pallet -
The amplifier is shipped attached to a
shipping pallet. This pallet serves two purposes. First, and
foremost it acts to tie down the mechanically isolated transformer
platform. Secondly, it provides strength to the main chassis. Both
of these items are critical to ensure that no damage occurs in
transit. After removing the amplifier from the box and packing
material, CAREFULLY turn the unit upon its side. Remove the 4
thumbscrews and washers. Retain these screws and pallet in the
event that the unit ever needs servicing. See Figure 1.
WARNING : Shipping this unit without correctly attaching
the shipping pallet can result in serious structural damage
to the unit.
IF THERE IS A PROBLEM
Below is a checklist of possible solutions if any problems are encountered.
IF THERE IS NO SOUND
1)
Check that all input and output signal connections are secure.
2)
Ensure that all tubes are properly seated in sockets.
3)
Ensure that power cord is seated securely.
IF SOUND DISTORTIONS ARE PRESENT
1)
It is possible that a tube has gone bad. Return the unit to the
dealer to the dealer to test the tubes.
If these do not clear the problem, please call Rogue Audio Technical
Support on 570-992-9901
.
OWNER AND WARRANTY REGISTERATION FORM
Included with this manual is an Owner and Warranty Registration
Form. Please take a minute to fill out this card and return it Rogue
Audio.
Figure 1
Shipping
Pallet
Washer (4)
Thumbscrews
(4)
Rogue Eighty-Eight Owners Manual
2
Rogue Eighty-Eight Owners Manual
11
