7
3
4
2 plates in front = total lockout
Note: Failure to snap the retainer in place between the two Lockout Plates could result in the plates
disengaging or damage to the plates.
With both Lockout Plates forward of the retainer, the Tek Sled arm is completely locked out, restricting
movement to the response of the pad only.
Adjusting Shock Angle
The feel of the shock system can be softened by moving the front of the shock to the lower mount. To
access the shock, you must first remove the shock cover. Use a 7/32” allen wrench to remove the 4 bolts
holding the shock cover in place. Pivot the rear of the shock cover up while lifting from the front of the shock
cover.