10
WARNING!
READ AND UNDERSTAND ALL MAINTENANCE PROCEDURES.
Failure to follow all procedures listed below may cause serious injury and/or a
decrease in equipment functionality.
Maintenance
Frequently check to see that all bolts are securely fastened.
Pivots should be greased at least once a year.
There are 3 grease fittings on the knuckle area of
the Tek Sled arm. One at the back near the lockout plates, one at the top surface of the up-down pivot,
and one at the bottom of the left-right pivot near the square tube of the sled’s runner.
Touch up paint may be used to cover scratches or blemishes sustained through use.
Field equipment should be washed periodically with soapy water to maintain original surface
finish.
A silicone based lubricant may be used on moving parts to maintain proper function.
Replace any damaged equipment with genuine Rogers Athletic parts.
Failure to do so may result
in unsafe equipment and/or personal injury.
Remove pads when not in use.
Store pads in a safe, dry place.
Customer Service
For parts or service contact Rogers Athletic Company. When ordering parts be sure to provide all relevant
information available including the name and part number of the equipment purchased. This information is
located on the cover of this product information package. Customer service hours are Monday through Friday
from 8:00 a.m. to 5:00 p.m. Eastern Standard Time. Customers can phone (989) 386-2950 or toll free at (800)
457-5337. Fax toll free at (888) 549-9659 or mail to:
Rogers Athletic Company
3760 W. Ludington Drive
Farwell, MI 48622