RUD-3 v1.0 EN Rev. A.doc
2011-08-04
[3]
SSN or MSN number (reverse order)
LSB
MSB
0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A ...
Reader transmits: 0x17,0x16,0x15,0x14,0x13,0x12,0x11
Cards reading procedure allows for three steps, in each step reader attempts to read the
specified card number (CSN, SSN or MSN). Once the card number is successfully read
the remaining steps are skipped.
The RUD-3 allows to read the CSN from following types of cards:
Mifare 1K
Mifare 4K
Mifare Ultralight
Mifare DESfire
The SSN and MSN numbers can be read from following Mifare cards:
Mifare 1K
Mifare 4K
Note: The RUD-3 supports MAD version 1 sectors only (01-15).
W o r k i n g w i t h P R M a s t e r p r o g r a m
In the list of available readers in the PR Master 4.4.6 control program, RUD-3 readers
connected to the system are displayed. When reading a new card into the system or
modifying a card which had been enrolled earlier, you can use any device displayed in
the list, including the RUD-3 reader.
W o r k i n g w i t h R o g e r M i n i R e a d e r p r o g r a m
The
Roger MiniReader 1.2
displays the list of available USB readers connected to the PC.
In order to read a single card, you need to select the
Read single card
command, and
then put a card close to the reader. When the code is read, it automatically appears in
the
Card codes window
. The fact of card reading is signaled acoustically however this
feature can be possibly disabled using relevant program’s options (see:
Options
). If you
use the
Read multiple cards
command, program will read cards in a loop and insert them
to the
Card codes window
. In order to interrupt the reading process, you need to use the
Stop reading
command. The cards read can automatically be copied to the Clipboard (
Tools > Options >
Copy card code to clipboard
). By using it, the card codes can be