Roger PRT62, Installation And Programming Manual

Page: 3 / 32

PRT62 v1.1 fv74 EN Rev.E.DOC 10/25/2007
3
2 G
E N E R A L
2.1 Designed Function
The PRT62 terminal has been designed for use in access control installations or systems as an outdoor
proximity reader unit to enable user identification via EM 125 kHz UNIQUE standard proximity cards. The PRT62
unit can be configured for stand-alone mode (called OFFLINE mode) or for use with an external Access Control
Unit (ACU) supporting compatible data interface formats (ONLINE mode).
The PRT62 used in ONLINE mode works as a slave unit with its functions restricted down to reading cards and
providing subsequent transmission of such collected data to the host ACU for further processing. The PRT62
terminal has several data transmission formats available for use in ONLINE mode, which include the popular
Wiegand and Magstripe (i.e. simulation of output of a magnetic card reader) data protocols.
When configured for stand-alone operation (OFFLINE mode), a PRT62 reader independently (i.e. autonomously)
controls the supervised door access point. For this mode, it offers two installation options — one of them uses
its built-in I/O signal lines as standard general purpose inputs and outputs, the other uses them for
communication with an external XM-2 I/O module and a second PRT series reader. An access control
installation containing two PRT series readers (one at the entry, the other at the exit side of the supervised
door) enables two-way passage control. The system setup utilizing an XM-2 module provides higher level of
security for door access control system by separating its logical element (the reader unit) from the actuator
element controlling door lock (i.e. the door lock relay).
Note: When configured for Full Stand-alone Mode , a PRT62 reader may be used in pair with another PRT
series reader. In this setup both readers can provide two-way door control (entry and exit).
2.2 Features
Host-controlled mode (ONLINE mode)

26/34/42/66 bit Wiegand data format interfaces

Magstripe data format interface (ABA Track II emulation)

RACS communication interface (for PR series ACUs from ROGER)

LED/BUZZER control input
Stand-alone mode (OFFLINE mode)

System settings stored in nonvolatile memory

Enrollment of up to 120 users

User indexing (ID indexed user records)

Support for Door Contact (DC) and Request-To-Exit (REX) push button

Door Alarm output line

Reader Disarmed Output and Ready Input signals for integration with security systems

Two-way door control (requires additional PRT reader to form a pair)

Uses built-in I/Os or remote XM-2 I/O module