Installation guide for PR4xxDR-SETv2 Rev.A.doc
2017-02-02
2/5
1.
I
NTRODUCTION
1.1. This manual
This document contains essential information required during installation of PR411DR-SET and/or
PR402DR-SET. Detailed information regarding installation of PR411DR or PR402DR access
controllers can be found in included installation guides of these devices. Detailed information
regarding configuration and functionalities of PR411DR or PR402DR access controllers can be found
in functional manuals for PRxx1 and PRxx2 series respectively, available at
2.
D
ESCRIPTION AND SPECIFICATION
PR411DR-SET and PR402DR-SET (further referred to as PR4xxDR-SET) are kits consisting of
PR411DR-BRD or PR402DR-BRD access controller and mains power supply transformer (TRP
40/16/18) factory assembled in metal enclosure with a place for backup battery 7Ah/12V. The
enclosure is equipped with tamper switch. Each set can provide single door access control point
with one or two side identification. Each set can work with PRT series readers manufactured by
Roger, or with any other terminals working in one of popular data transmission formats like
Wiegand or Magstripe. Connection method is given in Installation Guides of PR411DR and PR402DR
controllers.
Benefits related to access control sets:
·
Complete solution. The kit contains all (apart from readers) devices needed to build fully
functional access control point
·
Esthetical metal enclosure
·
Quick and easy installation by means of included accessories
Table 1. Specification
Supply voltage
230VAC (+/- 15%), 50Hz
Transformer
TRP 40/16/18
Transformer output
voltage
18VAC/2,0A (supply voltage for controller) or 16VAC/2.2A
Tamper
30VDC/0,5A
Place for backup battery
7Ah/12V; sealed lead-acid battery (SLA)
Front panel closing
Four screws on the door side
Environmental class
(according to EN50131-1)
Class I, indoor conditions, temp.: +5°C - +40°C, relative humidity: 10
- 95% (no condensation)
Dimensions H x W x D
285x295x88mm
Weight (without battery)
approx. 3,5kg
Certificates
CE
PR4xxDR-SET contains the following elements:
·
PR4xxDR-BRD module access controller adapted to installation on DIN 35mm rail
·
Mains transformer TRP 40/16/18
·
Proximity card of Master user
·
Set of jumpers for addressing the controller
·
Metal enclosure with tamper switch, DIN rail (35mm)
·
Mounting screws
·
Back-up battery and transformer cables
·
Manuals
