CPR32-SE v2.0 EN Rev.B.doc
3/27/2010
Page
12
from
12
Ordering information
ME-1
Standard metal enclosure with 40VA transformer, one CPR32-SE/PR402 size
module can be installed in this enclosure.
ME-2
Large metal enclosure with 80VA transformer, when used together with ZMPR-
1 kit up to four CPR32-SE/PR402 size modules can be installed in this
enclosure.
ME-2-S
Large metal enclosure with 80VA transformer and factory equipped with ZMPR-
1 accessories; up to four CPR32-SE/PR402 size modules can be installed in this
enclosure.
ZMPR-1
Assembly kit for ME-2 enclosure, allows for assembly of up to four PR402
boards into single ME-2 enclosure, also suitable for extension modules and
CPR32-SE.
RM-2
Relay module with plastic enclosure, the RM-2 offers two relays with one
NO/NC contact 1.5A/24V rated, relay contacts are protected by surge arresters,
each relay can be triggered by applying supply plus or minus, the maximum
amount of current required to trigger relay is less then 5mA, two LEDs to
indicate triggering of relevant relay.
UT-2
RS232-RS485 communication interface.
UT-2USB
USB-RS485 communication interface.
UT-4 Ethernet-RS485/RS232
communication
interface.
RUD-1
USB-RS485 communication interface, built-in 12VDC/150mA output to supply
programmed device.
Contact
Roger sp.j.
82-400 Sztum
Go
ś
ciszewo 59
Tel.: +48 55 272 0132
Fax: +48 55 272 0133
E-mail:
Web:
www.roger.pl
