Version
2020.4
Operating
Guide
4
The ECU is located on the non-drive side of the down tube. There is
no need to remove the ECU from the bike.
There is a compartment door at the bottom of the ECU. To open the
compartment door to access the batteries use the edge of a coin like
a nickel and perform ¼ turn.
Align new batteries (polarity) according to diagram on battery
compartment door and reverse the ¼ turn to close. It is
recommended to use only Lithium batteries in the ECU.
After new batteries are installed, push Up or Down Control Button
and listen for "click" of Selector. If no "click" is heard, verify batteries
are installed correctly.
Changing the batteries every 500 miles or at least once per season is
recommended.
AUTO/MANUAL OPERATION
Manual Mode
o
Rotate Auto/Manual toggle switch (located on Junction Box
housing) so knurled portion of toggle switch is turned to ‘M’.
