Rodia FB750W Operating Manual Download Page 7

RODIA

®

 SAFETY

HAZARD SYMBOLS

  READ MANUAL CAREFULLY BEFORE USE

 

Carefully read and understand  

 

this operating manual and the  

 

enclosed safety instructions prior  

 

to using the machine.

  WEAR SAFETY GEAR

 

Always wear safety glasses and  

 

hearing protection when 

 

operating the machine

  DO NOT SPRAY WATER ON TILE DRILL

 

Avoid direct water spray on   

 

motor and switch housing when  

 cleaning. 

  TURN OFF DRILL BEFORE PLUGGING IN

 

It is important to make sure that  

 

the switch is in the OFF position  

 

before plugging in the machine

 

to prevent accidental starting of 

 

the machine.

  ELECTRICAL SHOCK

 

It is important to never touch  

 

electrical components of the 

 

machine while the machi-   

 

ne is in operation.  

  KEEP AWAY FROM MOVING PARTS

 

It is important to keep hands,  

 

feet, hair and clothing away from  

 

all moving parts to prevent inju- 

 

ry. It is also important to be sure  

 

that covers and guards are al-

 

ways in their proper position. 

 

If not, serious injury can occur. 

RODIA FB750W OPERATING MANUAL   V10/2006R1  

 PAGE 7

Summary of Contents for FB750W













Reviews: