Rodia FB750W Operating Manual Download Page 6

RODIA

®

 SAFETY

  TOOL MAINTENANCE.

  It is important to keep tools clean and in  

  good working order.  This will result in  

  optimal performance of the machine.    

  Always follow the maintenance instructions  

  for proper tool maintenance.

  REDUCING ACCIDENTAL STARTING OF  

 MACHINE

 

  It is important to be sure that the

 

  switch is in the OFF position 

 

  before plugging in the machine.

  EQUIPMENT ACCESSORIES.

  It is important that you refer to the owner’s  

  manual for determining what are the    

  recommended accessories to use with this  

  type of equipment.  Using accessories that  

  are not recommended in the owner’s    

  manual may increase the risk of personal  

  injury and/or to people that are within  

  close proximity of the machinery.

  CHECKING THE EQUIPMENT FOR 

  DAMAGED PARTS.

  It is important to inspect the power tool  

  before using it to check for damaged   

  parts.  Any part of the machinery that is  

  damaged should be checked carefully to  

  determine whether or not it should be   

  used and whether or not it can function  

  properly for its intended use.

 

  It is important to check all the moving parts  

  of the machinery for proper alignment and  

  /or possible binding.   All broken or dama- 

  ged parts should be properly repaired or  

  replaced.  If these parts are not repaired  

  or replaced the proper operation of the  

  machine could be negatively affected. 

  Damaged bits should be replaced    

 immediately.

  NEVER LEAVE A TOOL RUNNING 

  UNATTENDED – TURN POWER OFF

  It is important never to leave a tool running  

  when not in use.  Also never leave the tool  

  until the drill has come to a complete   

  stop.  It is important to always turn the  

  power tool OFF when leaving the work  

  area or when a hole is finished.

PAGE 6 

   RODIA FB750W OPERATING MANUAL   V10/2006R1

Summary of Contents for FB750W













Reviews: