RODEC
Multi source
II
4
10)
Equalizer controls
This is used to regulate the degree of treble, middle and bass in the sound.
11)
Channel faders
Volume control for input-channel A and B.
12)
Crossfader
With this fader you can easily fade between the input-channels A and B. When the knob is
pushed completely to the left, the signal of channel A will appear on the output. When the
knob is pushed completely to the right, the signal of channel B will appear on the output.
13)
DJ micro input
Microphone
input.
14)
Input level potentiometer
Mike level for accurate adjustment for different types of microphones.
15)
Clip LED
This LED lights up when the microphone input signal is too high, this is on a level 3dB below
clipping. When this LED lights up the input level must be decreased with the input level
potentiometer (14).
16)
Equalizer
Triple tone control for DJ microphone.
17)
Talk-over control
Variable stage gain control level music suppression.
18)
DJ mike fader
Volume control for DJ mike
19)
Balance control
The balance between the amount of sound on the left and on the right is adjusted by using this
knob. When it is set to the center position, the gain is the same for left and right channel.
20)
Master output potentiometers
Volume controls final output of mixer towards slave- or integrated amplifers.
CONNECTIONS
A)
PHONO input Channel A
Phono input with a sensitivity of 5.0mV and build in RIAA correction.
B)
Line
inputs Channel A
Line inputs of channel A with a sensitivity of 200mV. To connect different apparatuses such as
a tuner, tape recorder, mini disc, cassette recorder, video recorder, etc.. The different inputs
can be selected with the input select button (7).
C)
PHONO input Channel B
Phono input with a sensitivity of 5.0mV and build in RIAA correction.
D)
Line
inputs Channel B
Line inputs of channel B with a sensitivity of 200mV. To connect different apparatuses such as
a tuner, tape recorder, mini disc, cassette recorder, video recorder, etc.. The different inputs
can be selected with the input select button (7).
E)
Ground
If the recordplayer has a ground wire, connect it to the ground terminal.
