- 09 -
- 10 -
2.
GRP/CH/RF setting
: long press the menu button
to enter setting interface. Then, short press the
menu button to switch to the next setting.
1.
Power
：
Long press the button for two seconds to
power it on/off.
Mute:Press the button to power on the silent mode ,
and press the button again to power off.
(Note:when muted, the audio signals will not be outputted.but the RF
signal will still be transmitted)
Transmitter Setting
Group GRP
: choose GRP and press + or + button to select A or B group.
Channel CH
: choose CH and press + or + button to select channels from 01 to 48.
GRP: A
RF power: L
CH:20
3.
Display brightness setting
: short press + or –
button until OLED light is displayed. Then, long
press the menu button to choose the correspond-
RF power setting
: choose RF Power to switch H or L power. H for high power
，
L for low
power.
Note:The OLED screen indicates the device is connected to Group A, Channel 20. Select
RF power as low power mode.
OLED light
5
4.
Backlight time
: short press + or – button until
BackLight is displayed. Then, long press the menu
button and the backlight time is blinking. Short
BackLight
Delay 30S
This product adopts two AA batteries to supply power.
Shotgun Microphone VDS-M1
Portable Receiver RX1
Optional Accessory
Operation Instruction
OLED Display
：
1.Transmitting Power Icon
2.Silence Icon
3.Input Volume Indicator
4.Battery Level Indicator
5.Wireless Group and Channel
6.Communication Frequency
CH- A - 01
514. 560MHz
1
6
5
2
3
4
ing brightness level. Short press + or – button to choose the brightness
level from 1 to 8.
Note:The OLED screen indicates the current brightness level is level 5.
press + or – button to choose backlight time from ON, OFF and
Delay10S/30S/60S.
Note:The OLED display indicates the current backlight delay is 30
seconds.
