I N C LU D E D ACC E S S O R I E S
- 14 -
S U P P L E M E N TA R Y M E S H H E A D
For instances in which the PinMic™ user is wearing a light-
coloured garment, RØDE have provided a supplementary
silver mesh head. This will maintain the PinMic™’s subtle
appearance on the clothing.
To switch from your pre-fitted black mesh head to the silver,
first disassemble your PinMic™ with your RØDE adjustment
tool. (This is best done over a desk or work surface to ensure
no parts are misplaced). Pull apart the two sections of the
adjustment tool to reveal the driver and socket sections.
Place your PinMic™ in the socket hole, mesh down, so that
the bottom of the microphone is visible. Match the flat
edges of the mesh head to the flat edges of the socket hole
to insert correctly. Then use the groove across the bottom of
the mic to unscrew the mic capsule from the mesh head.
Place microphone in the adjustment tool socket, mesh down
PinMic™
ADJUSTMENT TOOL
(DRIVER)
ADJUSTMENT TOOL
(SOCKET)
122-950-1-3_PinMic_manual_newspec.indd 14
122-950-1-3_PinMic_manual_newspec.indd 14
1/27/2011 3:14:23 PM
1/27/2011 3:14:23 PM
