background image

- 7 -

•    Shotgun microphones have a narrow ‘pick-up’ 

angle or polar response, and so can be used to 

great effect with cameras for news gathering, 

wedding videos, sporting events or in any 

situation where you want to focus on a particular 

area of sound source without having your audio 

overpowered by ambient noise.

 

The pick-up pattern of the NTG-3 has been 

tailored to be slightly wider and therefore more 

directionally forgiving than comparable shotgun 

microphones on the market. This makes boompole 

and handheld operation much easier.

•   The NTG-3 is supplied with a foam windshield.  

 This windshield should be used whenever 

recording outdoors, as even an unexpected slight 

breeze can cause unwanted sound interference.

•   For maximum wind protection a more specialised 

wind shield is recommended, such as the 

 

DeadCat, WS7 deluxe windshield, or the 

 

Blimp suspension windshield system.

•   The supplied weather resistant aluminium 

storage cylinder is designed to provide extreme 

environmental protection for your microphone 

when not in use, however it is not recommended 

that the cylinder be immersed in liquid. Damage 

to the microphone caused by water entering the 

storage cylinder is not covered by the microphone 

warranty.

Using the NTG-3

Summary of Contents for NTG-3









Reviews: