background image

- 2 -

Introduction

Thank you for your purchase of the 

 NTG-3 

precision broadcast-grade shotgun microphone.

The NTG-3 is one of 

’s most exciting

microphones. It is the result of years of development 
by 

 engineers, providing the professional 

broadcast and fi lm  industries  with  an  affordable  yet 
uncompromising microphone.

One of the key features of the NTG-3 is its ability to 
withstand adverse conditions. Using a technology 
known as RF bias the NTG-3 is almost completely 
resistant to moisture, making it the only option when 
recording in any demanding environments where 
condensation is an issue.

In addition to its very low weight and anti-glare fi nish, 
the NTG-3 also features incredibly low self-noise. I’m 
confi dent that you won’t fi nd a similar microphone that 
is this quiet.

When not in use you’ll be able to store the NTG-3 
in the weather resistant aluminium anti-roll storage 
cylinder (standard with purchase), providing additional 
protection when traveling and storing the NTG-3.

Please  take  the  time  to  visit 

www.rodemic.com

 and 

register your microphone for a full ten year warranty.

While there you can view studio/fi 

eld tips and 

techniques, as well as browse the comprehensive 
range of accessories for the NTG-3 and other 

 

microphones.

Peter Freedman

 Microphones

Sydney, Australia

Summary of Contents for NTG-3









Reviews: