background image

- 2 -

Introduction

On  behalf  of  the  entire  team  at 

 I’d like to 

personally thank you for investing in the 

 NT1-A 

studio condenser microphone. 

We’re proud to say that the NT1-A has become an 
industry standard  - providing the warmth, extended 
dynamic range, clarity and high SPL capability 
usually  only  featured  by  some  of  the  most  expensive 
microphones.

We’ve titled this the ‘Complete Vocal Recording 
Solution’ as we’ve included everything you need to 
get truly professional vocal recordings - the world’s 
quietest studio microphone, a studio grade popshield 
and shock mount, premium cable, dust cover and of 
course 

’s industry leading ten year warranty.

The NT1-A is an exceptional vocal microphone, but I’m 
pleased to say that you will fi nd it an equally capable 
microphone for almost any recording application 
including acoustic and electric instruments and 
percussion.

Please  take  the  time  to  visit 

www.rodemic.com

 and 

register your microphone for a full ten year warranty.

While there you can view studio tips and techniques, as 
well as browse the comprehensive range of accessories 
for the NT1-A and other 

 microphones.

Peter Freedman

 Microphones

Sydney, Australia

Summary of Contents for NT1-A













Reviews: