ROCSECURE
– Rocsafe MX User Manual
21
7.2
Administrative Mode
You may enter Administrative mode with ROCSAFE MX. In this mode, you can change the Admin PIN and/or
initialize a ROCSECURE smart card so as to use it with Rocsafe MX. Additional ROCSECURE smart cards may be
purchased from ROCSECURE. You will need a supported ROCSECURE smart card, and knowledge of the Admin PIN
to enter the mode. The default factory Admin PIN is “
87654321
”. To exit Administrative Mode, reconnect the USB
cable.
7.2.1
Smart Card Initialization
To initialize a smart card, follow these steps:
1.
Insert new smart card into Rocsafe MX.
2.
The Error LED will light up indicating an invalid card has been inserted. Ignore the LED.
3.
Press the
Admin
button and press
Enter
. The Status LED will blink three times.
4.
Enter the 8-digit Admin PIN and press
Enter
. The Status LED will blink three times and there will be two ‘beep’
sounds if the correct PIN was entered.
5.
Rocsafe MX will proceed to initialize the smart card to be used with that particular Rocsafe MX unit.
7.2.2
Change Admin PIN
The Admin PIN provides a layer of protection around your Rocsafe MX unit to deter others from unauthorized
usage of your Rocsafe MX. It is recommended that you change the default factory Admin PIN to another one that
only you know. To change your Admin PIN, follow these steps:
1.
Insert the smart card into Rocsafe MX.
2.
Press the
Change Pin
button, followed by the
‘0’
button.
3.
Press
Enter
. The Status LED will blink three times.
4.
Enter the current 8-digit Admin PIN and press
Enter
. The Status LED blinks twice to notify that you may press
the new Admin PIN.
5.
Enter the new 8-digit Admin PIN and press
Enter
. The Status LED blinks twice to notify that you may press the
confirmed new Admin PIN.
6.
Enter the new confirmed 8-digit Admin PIN and press
Enter
.
7.
The Status LED will blink three times and there will be two ‘beep’ sounds if the PIN change is successful.
If you have mistyped your PIN, press the
Esc
key at any time to restart the entire authentication process.
Note
:
Once a new smart card is initialized, you will need to repartition/reformat any existing drive, as the
encryption key will be different. The existing data in the drive will be unreadable with the new card.
Summary of Contents for Rocsafe MX
Page 1: ...ROCSECURE Rocsafe MX User Manual 1 store your future ROCSAFE MX User Manual...
Page 6: ...ROCSECURE Rocsafe MX User Manual 6...
Page 30: ...ROCSECURE Rocsafe MX User Manual 30 END Temp Rocsafe...
Page 39: ...ROCSECURE Rocsafe MX User Manual 39 Specifications Dimensions Weight Transfer rates...
