Rocmount ProM DRM – Desk/Rack Mount (Single Rail Attachement)
Horizontal Mount to Desk or Cabinet side: (Through Hole)
1.
Using mount ng template from shipping carton, place at locat on bracket s to be mounted and mark the four
mounting holes.
2
.
Us
i
ng a 5/32 or .140 drill, drill four through holes into the desk or mounting surface
3.
I
nstall the mounting bracket using the hardware provided: Screw 6-32 X 1 1/
8
"L Pan Head PH (4 each); #6 Split
Lock Washer (4 each) #6 Flat Washer (8 each) #6 Hex Nut Self Locking (4 each) as shown (You will need to
separate the mounting bracket from the Horizontal Mounting assembly.) Tighten all hardware until the mounting
bracket is firmly attached to the mounting surface (See Figure 1)
4. Install the
MAC® PRO
onto the computer mounting bracket using the clamps provided, using a flat Horizontal
work surface such as a desk or workbench. Make sure the thumbscrews are tight and the
MAC® PRO
is secure.(See
Figure 3.) A pictorial of assembling the
MAC® PRO
into its bracket while resting on a horizontal surface is
shown in
Fi ure 2 below.
Figure
2
Figure
1
Y100DRM-01 Rev 1.02
Apple and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
1
6/17
