Horizontal Mountinq: (Wood Screws)
1.
Using mounting template from shipping carton, place at location bracket is to be Mounted and mark the four
mounting holes.
2.
Using a 1/16 drill as a pilot drill, drill four pilot holes into the desk or mounting surface.
3.
Install the mounting bracket using the hardware provided: #6-18 X 5/8" PH Rd HD Woodscrews as shown
(4 each).
(
You will need to separate the mounting bracket from the Horizontal Mounting assembly.)
Tighten all hardware until the mounting bracket is firmly attached to the mounting surface {See Figure 1).
4.
Install the MAC® PRO onto the computer mounting bracket using the clamps provided, using a flat
horizontal work surface such as a desk or workbench. Make sure the thumbscrews are tight and the MAC® PRO
is secure. {See Figure 3.) A pictorial of assembling the MAC® PRO into its bracket while resting on a horizontal
surface is shown in Figure 2.
5
.
Carefully slide the
ProM
bracket assembly into the mounted bracket, using the two thumbscrews on the
front of the bracket assembly; tighten thumbscrews into the mounting bracket. {See Figure 4.)
6
.
Install external cables and tie along the mounting bracket using Velcro straps provided as shown. (See
Figure 3.)
Rackmount Installation
1
.
Separate the two mounting brackets in the Horizontal Mounting Kit. Using Mounting Bracket PN XBK-11333,
two (2) Cage Nuts and two (2) 10-32 X 5/8" Truss Screws, install the cage nuts into the rack cabinet vertical rail
where required. Mount the Bracket XBK-11333 in the Rack using the two screws and securely tighten the
screws. (See Figure 5.).
Figure 5
Y100DRM-01 Rev 1.02
Apple and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
3
6/17
