RAID 0
Q:
If I have 4 HDDs, can I create two sets of storage units by using RAID 0 Mode?
A:
The Bigroc 4-Bay is designed to support 4 HDDs, but it cannot create or support two sets of
storage units under RAID 0 mode.
Rebuild
Q:
Does the RAID have to be connected to the host computer when it is in Rebuild Mode?
A:
No. The RAID can support off-line Rebuild, which means it can perform the Rebuild function
without being connected to a host computer.
Q:
I replaced a hard drive with the new one when the RAID System is rebuilding and a warning
notice of “the device is not safely removed” pops out. What should I do?
A:
This only occurs when the RAID System is connected under the USB 2.0 interface. Please
ignore the warning and continue the rebuilding process.
BIGROC 1S – 4Bay RAID - 1U Rack Mount System - User Manual
Page | 29