The Z21
is a FLEISCHMANN and ROCO innovation.
25
English
zLink
Interface for configuration and firm
-
ware update
Programming button in normal mode:
•
hold down until “Program” flashes (for at least 3 s):
Configuration mode
•
hold down until all LEDs are shining (for at least 8 s):
Resetting to factory settings
Programming button in configuration mode:
•
press briefly:
To change the setting (for option 3 only)
•
hold down until “Status” flashes blue
(for at least 3 s): next option
Point outputs 1 – 4
Point outputs 5 – 8
individually configurable
Track signal
DCC signal input from the central control unit or booster
Supply
from the track or power unit
12 – 20 V DC or DCC rail voltage
min. 2 A for example: ROCO 10850
LED status normal mode
LEDs in configuration mode:
shines blue
Track signal pending
flashes blue
No track signal
flashes red
Short circuit
flashes geen
Data received
shines green
Addressing in compliance
with RCN-213
flashes white once
option 1:
Addr. for
shines green
set outputs 1 to 8
flashes white twice
option 2:
Addr. for
shines red
set outputs 5 to 8
flashes white 3 times
option 3:
Addr.
shines red
compatible with
ROCO
or
flashes white 3 times
option 3:
Addressing
shines green
in conformity with
RCN-213
Option 1 and option 2:
• Switch the magnetic item (e.g. point command) with the desired
address
• Address is adopted from the Z21 switch DECODER
Option 3:
The addressing mode can be changed by briefly pressing the pro
-
gramming button.
1. Quick guide