7
Installation
Best place to mount the unit:
You will get the best performance from your detector if
you mount it approximately in the center of the
windshield, as close as possible to the rear view mirror
without obstructing the unit’s view of the road either to
the front or rear. Make sure unit is level with the road.
Dash mount is not recommended. The unit’s Laser lens
must not be blocked and the Laser Lens should have a
clear view out of the back window to allow 360° Laser
detection.
Radar and laser signals pass through glass but not
through other materials and objects such as:
•
Windshield wipers
•
Sun shades
•
Metallic tinting on the windshield
•
Heated windshields
(Instaclear for Ford, Electriclear for GM.)
Mounting the Unit:
1.) Place the suction cups on the windshield bracket.
2.) Place the windshield bracket into The Judge 2.0.
Align the edge of the bracket with the slot opening on the
front of the case. Gently slide the bracket into the case
while pressing the bracket release button
until it locks
into place. To release bracket, press the bracket release
button as you slide out the bracket.
