To order parts and supplies: 800.343.9353 >> eastwood.com
7
Tool doesn’t re-
spond to trigger
depression
Insufficient vol-
ume of air (CFM)
to operate tool
Verify sufficient air supply to tool.
(7 CFM @ 90 PSI minimum requirement).
Moisture or oth-
er contamination
in air supply
Check for moisture in air line and tool air inlet.
Tool perfor-
mance is slow
or sluggish
Insufficient
volume of
air (CFM) to
operate tool
Verify sufficient air supply to tool.
(7 CFM @ 90 PSI minimum requirement).
Moisture or oth-
er contamination
in air supply
Check for moisture in air line and tool air inlet.
Air Motor
is lacking
lubrication
Stop use immediately and add air tool oil directly
to air inlet.
Tool is exces-
sively noisy/
emits high
pitched sound
Air Motor
is lacking
lubrication
Stop use immediately and add air tool oil directly
to air inlet.
Tool vibrates
excessively
during use
Loose Chuck
Jaws
Tighten Chuck Jaws.
Out of balance
condition from
damaged Chuck
Stop use immediately, check for damaged Chuck.
Out of balance
condition from
damaged drill bit
or accessory
Stop use immediately, replace damaged drill bit
or accessory.
TROUBLESHOOTING