To order parts and supplies: 800.343.9353 >> eastwood.com
5
SET-UP
• Using a good quality
Teflon sealing tape (not
included), thread the
1/4” MNPT, Male quick
disconnect inlet fitting
into the air inlet.
• Slip the Brass Handle
Clamp over the Chuck
and onto the main
Drill Body.
NOTE:
It may be
necessary to spread
the Handle Clamp
slightly to fit it over
the Chuck
(FIG 1)
.
• Compress the thread
portion of the Handle
Clamp together then
thread the Handle onto
the Handle Clamp
(FIG 2).
NOTE:
Do not fully
tighten Handle until a
comfortable position is
found for the Handle.
FIG. 1
FIG. 2
Chuck
✓
Handle
Clamp
Slide
✓
✓
Chuck
Key
Handle
Forward
(normal drilling
direction)
Reverse
Trigger
Handle Clamp
✓
✓
✓
✓
✓
✓
