Safety Application Example
Single Safety Gate Protection Using
SmartGuard 600 Packaged Safety Controller
Safety Network-enabled Example
Safety Rating: Category 4, according to EN954-1
Introduction
This example shows how to wire, configure and program a
SmartGuard 600 safety controller to monitor a safety gate using two
safety limit switches.
Features and Benefits
•
A single SmartGuard 600 safety controller monitors state of limit
switches.
•
The safety system described in this example could be expanded
as needed, by adding additional safety input or outputs.
•
This example provides easy integration into Logix or
GuardLogix controllers and HMIs through CIP Safety on
DeviceNet networks.
Topic
Page
