InSpec Remote I/O HUB (ATEX, IECEx)
Section 7: Adjustment & Calibration
25
Adjustment & Calibration
Once
installed
and
commissioned the unit requires no adjustment except for periodic recalibration when
necessary.
Please refer to the InSpec Enhanced Controller Instrument Operation Manual for details on the
following:
o
Analogue input re-calibration (RIO-ANI Module) – if fitted.
o
Analogue output re-calibration (RIO-ANO Module) – if fitted.
Please refer to the product GM Int. handbooks for calibration instructions for the following:
o
Load-Cell Amplifier Calibration (GM Int. D5264S Modules) - If fitted.
o
Can-High Isolating Converter Adjustment (GM Int. D5030D Module(s) – If fitted.
GM Int. products require
a Windows™ PC/Laptop with USB port, GM Int. PPC5092 adapter
(includes driver software) and associated SWC5090 software (http://www.gminternational.com)
WARNING:
Adjusting Intrinsically Safe Modules requires the enclosure to be open whilst it
contains hazardous live parts. This
must
only be carried out within the requirements of all
applicable customer, statutory and regulatory requirements.
