1-16
PowerFlex 40 Standard Configured Drive Standard Features and Options
I/O Options
DeviceNet I/O (4 In/2 Out) w/Spring Return HOA and Power Disconnect
Aux. Contact (Position 16+, Code R3)
This option provides a factory installed 800F door mounted operator device,
a 100-DNY42R and a power disconnect auxiliary contact mounted internal
to the cabinet.
The Hand/Off/Auto selector switch will start the drive while held in the
Hand mode and stop it in the Off mode. The default speed reference comes
from parameter P038, option 4 (Preset Freq). The selector switch has a
spring return disallowing the operator to remain in Hand. When in Auto the
default speed reference is derived parameter A051, option 4 (Preset Freq).
The 100-DNY42R is powered by DeviceNet and provides control based on
customer control parameters.
This option is prewired with an auto contact from the Hand/Off/Auto
selector switch between the I/O V+ and IN0 terminals. The main power
disconnect auxiliary contact is wired between the I/O V+ and IN1 terminals
indicating if the disconnect is on or off. Two inputs and two outputs are
available for customer use.
Component Specifications
This option must be used with the drive mounted DeviceNet option D
(Position 12) and is not compatible with options R4, R5, S1, S4, S7, S8,
S20, S21 or S22. The drive mounted DeviceNet and the 100-DNY42R will
appear as separate nodes on the communication system.
Bulletin 800F
Devices
IEC style, Internationally rated
Meet IP65/IP66 and NEMA/UL Type 4/4X/13
UL Listed, CSA Certified
10 amp contacts
Screw terminals, 0.3–3.5 mm
2
(22–12 AWG) maximum
Hand/Off/Auto
Selector Switch
3 position, Hand (spring return), Off, Auto (maintained)
3 N.O. & 3 N.C. contacts
Legend Plate
30 x 50 mm, Black with white lettering
Wiring
0.8 mm
2
(18 AWG), Blue
100-DNY42R
cULus Listed, CSA, CE
DeviceLogix™, Rotary address switches
24V DC or 120V AC inputs
High-Capacity transistor or Relay outputs
ODVA Compliance v2.0 Tested
Power Disconnect Auxiliary Contact
1 N.O. & 1 N.C. Side mounted contacts
Schematic
Summary of Contents for PowerFlex 40
