7
Publication SAFETY-AT020A-EN-P – October 2008
7.
In the RSNetWorx online graph, double-click
1752-L24BBBE SmartGuard controller to open the SmartGuard
controller’s properties dialog box.
The screen should look like this.
Configuring the Target EtherNet/IP Assemblies in the
SmartGuard 600 Controller
Follow these steps to configure the target EtherNet/IP assembly in the
SmartGuard 600 controller.
1.
Click the EtherNet/IP Target I/O tab.
2.
Click New to create a new EtherNet/IP input or output target
assembly.
3.
In the Edit EtherNet/IP Target I/O dialog box, select Target Input.
4.
You can add status information by checking the Status checkboxes.
You can add Local I/O monitor data by checking the appropriate
Local I/O Monitor checkbox.
