Rockwell Automation iTRAK, User Manual

Page: 43 / 124

Rockwell Automation Publication 2198T-UM002C-EN-P - March 2019 43
Track Installation Chapter 2
Figure 18 - Mounting Dimensions and Clearance
Wire Lubrication Pump
Connect the power cable the 24V I/O port of your controller.
An initial coating of oil is required on the entire track before operating the
iTRAK and auto lubrication systems.
Lubrication Pump Configuration
See Lubrication on page 100 to make tube connections, initial lubrication, and
lubrication during normal operation.
372.5
(14.65)
326
(12.8)
287
(11.3)
45.4
(1.79)
108
(4.25)
108
(4.25)
108
(4.25)
95.25
(3.750)
127.0
(5.02)
6.35
(0.250)
102
(4.0) 33
(1.3)
89
(3.50)
63.5
(2.50)
Ø 62
(Ø 2.5)
5.0 m (16.4)
22.0 mm (0.87)
108
(4.25)
Minimum static
bend radius
Power Cable Length
Plug (X3)
Minimum
Clearance
Elbow
Fitting (X3)
Straight
Fitting (X3)
Minimum
Clearance Minimum
Clearance
Minimum
Clearance
1
2
3
4
BROWN
WHITE
BLUE
BLACK 1
2
3
4
+24V
Not Used
GND
Not Used
M8
Connector
IMPORTANT The mover cams distribute the oil on the track. The movers must be in
motion when the pump is activated, otherwise the oil drips away.
Table 14 - Recommend Lubrication Pump Setting
Feature Setting
Mode Impulse