26
Rockwell Automation Publication 2198T-UM002C-EN-P - March 2019
Chapter 1
Start
Digital USB I/O Module
The digital USB I/O module provides an interface between the power supply
that is used by your system and the gateway. This module must be included in
your system when using Kinetix 5700 iTRAK power supply.
Figure 13 - 2198T-GUSB, Digital USB I/O Module
The status indicator indicates power and data transmissions. When the status
indicator is in an illuminated steady green state, the module is successfully
connected to the gateway computer and the operating system has detected and
configured it. When the status indicator blinks continuously, there is data
being transmitted over the USB bus.
Item
Description
Item
Description
1
Terminal blocks
3
USB connector
2
Removable cover
4
Power status indicator
1
3
4
2
Summary of Contents for iTRAK
