Rockwell Automation Publication KNX-TD005A-EN-P - October 2021
91
Common Accessories
Low-profile Connector Kit Components
Low-profile connector kits are designed for use with the Kinetix 300/350, Kinetix 6000, Kinetix 6200/6500, Kinetix 2000, and Kinetix 7000 drives,
and LIM modules. Use this table to identify the low-profile connector kit for your feedback or I/O connector.
Dimensions - Low-profile Connector Kits
Catalog Number 2090-K2CK-D15M
IMPORTANT
The flying-lead compatible cables listed below require connector kits to complete feedback and I/O connections to the drive.
Cat. No.
Description
Cable Compatibility
2090-K2CK-D15M
Low-profile connector kit for motor feedback (15-pin, male, D-sub). Use with any Kinetix 2000 IAM/AM module or
Kinetix 300/350 drive and compatible motors with incremental or high-resolution feedback. Does not include 3.6V
battery (catalog number 2090-DA-BAT2) required for use with TLY-A
xxxx
-B high-resolution motors and 17-bit encoders. 2090-XXNFMF-S
xx
2090-CFBM4DF-CDAF
xx
2090-CFBM7DF-CEAA
xx
2090-CFBM7DF-CEAF
xx
2090-CFBM7DF-CDAF
xx
2090-CFBM6DF-CBAA
xx
2090-K2CK-COMBO
Low-profile connector kit for motor feedback (15-pin, male, D-sub) and I/O (44-pin, male, D-sub). Use with any
Kinetix 2000 IAM/AM module and compatible motors with incremental or high-resolution feedback. Does not include 3.6V
battery (catalog number 2090-DA-BAT2) required for use with TLY-A
xxxx
-B high-resolution motors and 17-bit encoders.
The 2090-K2CK-COMBO kit, mounted on the Kinetix 2000 (IAM/AM) drive, fits in a standard 10 in. enclosure.
2090-K6CK-D15M
Low-profile connector kit for motor feedback (15-pin, male, D-sub). Use with any Kinetix 6000, Kinetix 6200/6500, or
Kinetix 7000 drive and compatible motors with incremental or high-resolution feedback.
Low-profile connector kit for motor feedback (15-pin, male, D-sub). Use with any Kinetix 6000 IAM/AM module and
MPL-B
xxxx-
R or MPM-A/B
xxxxx
-2 (resolver feedback) motors.
2090-CFBM7DF-CEAA
xx
2090-CFBM7DF-CEAF
xx
2090-K6CK-D15F
Low-profile connector kit for auxiliary feedback (15-pin, female, D-sub). Use with any Kinetix 6000 IAM/AM module or
Kinetix 7000 drive auxiliary feedback application.
Customer supplied
2090-K6CK-D26M
Low-profile connector kit for I/O (26-pin, male, D-sub). For use with any Kinetix 6000 IAM/AM module, Kinetix 7000 drive,
or 2094-AL09 and 2094-BL02 LIM module.
2090-K6CK-D44M
Low-profile connector kit for I/O, safety, and auxiliary feedback (44-pin, male, D-sub). For use with any Kinetix 6200 or
Kinetix 6500 control module.
2090-K6CK-D44S0
Low-profile connector kit for I/O and cascading safe torque-off signals (44-pin, male, D-sub). For use with any Kinetix
6200 or Kinetix 6500 (safe torque-off, -S0 control module). Refer to Kinetix 6200 and Kinetix 6500 Safe-off Components
on
for example diagrams.
2090-CS0DSDS-AA
xx
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
45
(1.7)
20
(0.8)
103
(4.0)
61
(2.4)
20
(0.8)
Dimensions are in mm (in.)
2090-K2CK-D15M (motor feedback)
15-pin Feedback Connector
3.6V battery (catalog number
2090-DA-BAT2) for use with only
TLY-A
xxxx
-B motors (high-resolution 17-
bit encoders).
