manualshive.com logo in svg

Rockwell Automation Allen-Bradley VersaView 6180W-12BPXPH, User Manual, Page: 47 / 70

Share
Download
Rockwell Automation Allen-Bradley VersaView 6180W-12BPXPH User Manual Download Page 47

Publication 6180W-UM001H-EN-P - August 2007

46

        Replace System Components

Replace the 
CD-ROM/DVD-ROM Drive

Follow these precautions when working with the CD-ROM/DVD-ROM 
drive. 

•

Do not touch internal components. 

•

Always handle the drive by its metal frame.

•

Store the drive in an anti-static bag when it is not installed.

•

Never disconnect or install a drive with the power on.

Remove the Drive 

The procedure shows how to remove the CD/DVD drive from the 
1500W and non-display workstations.

1.

Disconnect power from the computer.

2.

Remove the back cover.

3.

Disconnect the power supply, audio cable, and ribbon cable 
from the drive.

ATTENTION

Failure to follow proper safety precautions could result in 
severe electrical shock and/or damage to the computer.

ATTENTION

Mechanical shock can damage a CD-ROM or DVD-ROM drive. 
Do not drop or bump the drive. 

TIP

For the 1200W, remove the drive assembly as described under 
Replace the Hard Disk Drive. You can then remove the CD/DVD 
drive similar to the 1500W and non-display workstations.

IMPORTANT

Note the location and orientation of all cables before you 
remove the existing power supply and cabling, so that you can 
reattach them correctly.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Allen-Bradley VersaView 6180W-12BPXPH







































































Reviews:

No comments