Rockwell Automation Allen-Bradley VersaView 5000 ThinManager Series User Manual Download

Page: 51 / 72

Rockwell Automation Publication 6200-UM001C-EN-P - July 2018

Appendix

Install Accessories

Available Accessories

You can view a list of accessories at

http://ab.rockwellautomation.com/

Computers/Integrated-Display-Computers/6200-VersaView-5400

Review the specifications of a new component before you install it to verify
that it is compatible with the computer. Record the model, serial number, and
any other pertinent information of new components for future reference.

Disconnect Power

There is line voltage input to any power supply adapters. Disconnect all power
to the computer before you install or remove components.

Topic

Page

Available Accessories

Disconnect Power

Electrostatic Discharge Precautions

Pre-configuration

Post-configuration

Required Tools

Replace a Factory-installed Bookshelf Mounting Plate

Install the VESA Mounting Plate

Install the DIN Rail Mounting Kit

Install the Machine Mounting Bracket Kit

Install the Legacy Mounting Plate

IMPORTANT

We recommend that you use only Allen-Bradley® approved accessories.

SHOCK HAZARD:

Disconnect all power to the computer before you remove

components.

Failure to disconnect power can result in severe electrical shock to an individual
or damage to the computer.

Summary of Contents for Allen-Bradley VersaView 5000 ThinManager Series









































































Search results

Summary of Contents for Allen-Bradley VersaView 5000 ThinManager Series

Reviews:

Related manuals for Allen-Bradley VersaView 5000 ThinManager Series

Brands by name

Popular brands

Rockwell Automation Allen-Bradley VersaView 5000 ThinManager Series, User Manual

Search results

Summary of Contents for Allen-Bradley VersaView 5000 ThinManager Series

Reviews:

Related manuals for Allen-Bradley VersaView 5000 ThinManager Series

Brands by name

Popular brands