background image

3

Publication 20P-IN069A-EN-P

5. Remove the three fuses at locations F11, F21 and F31. 

6. Install the new fuses.

7. Close the control panel. See steps 

3.

 an

4.

 on 

page 2

.

8. Replace the DPI cable (if present).

XCD

X1UVW1

XUVW

F31

F21

F11

Summary of Contents for Allen-Bradley PowerFlex Series

Page 1: ...y may result in personal injury and or equipment damage ATTENTION To avoid an electric shock hazard ensure that all power to the drive has been removed before performing the following ATTENTION This drive contains ESD Electrostatic Discharge sensitive parts and assemblies Static control precautions are required when installing testing servicing or repairing this assembly Component damage may resul...

Page 2: ...ons When you remove or insert a cable connector with power applied an electrical arc may occur An electrical arc can cause personal injury or property damage by sending an erroneous signal to your system s field devices causing unintended machine motion causing an explosion in a hazardous environment Electrical arcing causes excessive wear to contacts on both the module and its mating connector Wo...

Page 3: ...on 20P IN069A EN P 5 Remove the three fuses at locations F11 F21 and F31 6 Install the new fuses 7 Close the control panel See steps 3 and 4 on page 2 8 Replace the DPI cable if present XCD X1UVW1 XUVW F31 F21 F11 ...

Page 4: ...treet Milwaukee WI 53204 2496 USA Tel 1 414 382 2000 Fax 1 414 382 4444 Europe Middle East Africa Rockwell Automation SA NV Vorstlaan Boulevard du Souverain 36 1170 Brussels Belgium Tel 32 2 663 0600 Fax 32 2 663 0640 Asia Pacific Rockwell Automation Level 14 Core F Cyberport 3 100 Cyberport Road Hong Kong Tel 852 2887 4788 Fax 852 2508 1846 Power Control and Information Solutions ...

Reviews: