14
Rockwell Automation Publication 1766-UM002E-EN-P - June 2019
Chapter 2
Use Data Views to Access Controller Data
Change an Access Group
Each data view contains a group of files that you want to monitor. Each
MicroLogix 1400 controller can support multiple data views. One browser
supports only one data view, so if you want to look at many data views, you need
to run a corresponding number of browsers.
You change an access group from the Data Views
→
New Data View page.
1.
From the Access Group pull-down menu of the given data table file, choose
one of the following access group types:
·
Administrator (all access except write)
·
Write (read/write access only)
(1)
·
Read (read only)
2.
Choose Administrator, Write, or Read from the Access Group pull-down
menu to change a file's access group.
3.
Click Apply
to change an access group for the data table file
you specified.
(1)
For MicroLogix 1400, revision 21.006 or later, Write access is not supported and is listed as Invalid from the
drop-down selection.
