Rockwell Automation Allen-Bradley Kinetix TLP Series, Installation Instructions Manual, Page: 8 / 16

8 Rockwell Automation Publication TLP-IN001A-EN-P - October 2019
Kinetix TLP Servo Motors with 046…235 mm Frame Size
Motor Dimensions (200 and 235 mm frame sizes)
Motor Dimensions (200 and 235 mm frame sizes)
Motors are designed to metric dimensions. Inch dimensions are approximate conversions from millimeters. Dimensions without tolerances are for
reference.
Motor
Cat. No.
HD
mm (in.)
HD1
mm (in.)
LA
mm (in.)
LB
(1)
mm (in.)
(1) For TLP-A200-200 and TLP-A200-750 motors with brake, add 34.1 mm (1.34 in.).
For TLP-A200-300 and TLP-A200-350 motors with brake, add 33.2 mm (1.31 in.).
For TLP-A200-450 motors with brake, add 44.0 mm (1.73 in.).
For TLP-A200-550 motors with brake, add 32.0 mm (1.26 in.).
For TLP-A235-11K and TLP-A235-15K motors with brake, add 63.0 mm (2.48 in.).
L-LB
(2)
mm (in.)
(2) Tolerance for this dimension is +0.38, -0.50 mm (+0.015, -0.020 in.).
LW
mm (in.)
D
mm (in.)
M
mm (in.)
S
mm (in.)
N
(5)
mm (in.)
(5) See dimensions diagram for tolerances.
P
mm (in.)
G
mm (in.)
GD
mm (in.)
W
mm (in.)
WK
(5)
mm (in.)
TLP-A200-200
174.9
(6.89)
231.0
(9.09)
20.0
(0.79)
169.7
(6.68)
79.0
(3.11) 63.0
(2.48) 35.0
(1.38)
200.0
(7.87)
13.5
(3)
(0.53)
(3) Tolerance for this dimension is ±0.10 mm (±0.0039 in.).
114.3
(4.50) 180.0
(7.09)
30.0
(1.18)
8.0
(0.31)
10.0
(6)
(0.394)
(6) Tolerance for this dimension is +0, -0.036 mm (+0, -0.01417 in.).
10.0
(6)
(0.394)
TLP-A200-300
202.8
(7.98)
TLP-A200-350
TLP-A200-450
254.0
(10.0)
TLP-A200-550
240.0
(9.45)
280.4
(11.04)
113.0
(4.45)
90.0
(3.54)
42.0
(1.65)
13.5
(4)
(0.53)
(4) Tolerance for this dimension is ±0.20 mm (±0.0079 in.).
37.0
(1.46) 12.0
(7)
(0.47)
(7) Tolerance for this dimension is +0, -0.043 mm (+0, -0.00169 in.).
12.0
(7)
(0.47)
TLP-A200-750
342.7
(13.49)
TLP-A235-11K
194.6
(7.66) 279.1
(10.99)
372.1
(14.65)
116.0
(4.57) 235.0
(9.25) 200.0
(7.87) 220.0
(8.66)
TLP-A235-15K
451.1
(17.76) 55.0
(2.17) 49.0
(1.93) 10.0
(0.39) 16.0
(7)
(0.63)
16.0
(7)
(0.63)
LA
TP
WK
GD
W
L-LB
T
HD
HD1
LW
D N
LB
P
LW
G
Shaft End Details
Shaft Diameter
Optional Shaft Seal
Refer to page 15 for motor
shaft seal kit information.
S Diameter Holes on
M Diameter Bolt Circle
Dimensions are in mm (in.)
Shaft and Pilot Tolerances TLP-A200-
xxx
TLP-A235-11K TLP-A235-15K
Shaft Runout (T.I.R.) 0.02 (0.0008) 0.04 (0.0016) 0.04 (0.0016)
Pilot Eccentricity (T.I.R.) 0.04 (0.0016) 0.04 (0.0016) 0.04 (0.0016)
Max Face Runout (T.I.R.) 0.04 (0.0016) 0.06 (0.0024) 0.06 (0.0024)
Shaft-end Threaded Hole (TP) M12x1.75-6H, 25 M16x2.0-6H, 32 M20x2.5-6H, 40
Power Connector
Feedback
Connector
Pilot Diameter Tolerances
TLP-A200
-
200…TLP-A200
-
750 Motors:
Ø 114.265…114.300 (4.4986…4.500)
TLP-A235
-
11K…TLP-A235
-
15K Motors:
Ø 199.954…200.00 (7.8722…7.8740)
Key Details
Shaft Diameter Tolerances
TLP-A200
-
200…TLP-A200
-
450 Motors:
Ø 34.984…35.000 (1.3773…1.3779)
TLP-A200
-
550…TLP-A200
-
750 Motors:
Ø 41.984…42.000 (1.6529…1.6535)
TLP-A235
-
11K Motors:
Ø 41.984…42.000 (1.6529…1.6535)
TLP-A235
-
15K Motors:
Ø 54.989…55.030 (2.1649…2.1665)
Alternative Shaft
Keyway Type
Lifting points apply to TLP-A200-550,
TLP-A200-750, and TLP-A235-
xxx
servo motors only.
Brake connectors apply to TLP-A200-550,
TLP-A200-750, and
TLP-A235-
xxx
servo motors only.
Power Connector
Feedback
Connector
Brake
Connector