Rockwell Automation Allen-Bradley Kinetix TLP Series, Installation Instructions Manual, Page: 6 / 16

6 Rockwell Automation Publication TLP-IN001A-EN-P - October 2019
Kinetix TLP Servo Motors with 046…235 mm Frame Size
Motor Dimensions (046…100 mm frame sizes)
Motor Dimensions (046…100 mm frame sizes)
Motors are designed to metric dimensions. Inch dimensions are approximate conversions from millimeters. Dimensions without tolerances are for
reference.
Motor
Cat. No. HD
mm (in.)
LA
mm (in.)
LB
(1)
mm (in.)
(1) For TLP-A046-005 motors with brake, add 34.2 mm (1.35 in.). For TLP-A046-010 motors with brake, add 34.8 mm (1.37 in.).
For TLP-A070-020 motors with brake, add 33.6 mm (1.32 in.). For TLP-A070-040 motors with brake, add 33.7 mm (1.33 in.).
For TLP-A090-075 motors with brake, add 37.4 mm (1.47 in.).
For TLP-A100-100 motors with brake, add 31.1 mm (1.22 in.).
L-LB
(2)
mm (in.)
(2) Tolerance for this dimension is ±0.50 mm (±0.020 in.).
LW
mm (in.)
D
mm (in.)
M
mm (in.)
S
mm (in.)
N
(5)
mm (in.)
(5) See dimensions diagram for tolerances.
P
mm (in.)
G
mm (in.)
GD
mm (in.)
W
mm (in.)
WK
mm (in.)
TLP-A046-005
53.8
(2.12) 5.0
(0.20)
71.9
(2.83)
25.0
(0.98) 16.0
(0.630) 8.0
(0.3149) 46.0
(1.811) 4.50
(3)
(0.177)
(3) Tolerance for this dimension is ±0.10 mm (±0.0039 in.).
30.0
(1.181) 40.0
(1.57) 6.20
(0.244) 3.0
(0.118) 3.0
(6)
(0.118)
(6) Tolerance for this dimension is -0.004, -0.029 mm (0.000157, -0.001141 in.).
3.0
(8)
(0.118)
(8) Tolerance for this dimension is +0, -0.025 mm (+0, -0.000984 in.).
TLP-A046-010
86.0
(3.39)
TLP-A070-020
74.1
(2.92) 7.5
(0.30)
84.7
(3.33)
30.0
(1.18) 20.0
(0.787) 14.0
(0.5512) 70.0
(2.756) 5.50
(4)
(0.216)
(4) Tolerance for this dimension is ±0.20 mm (±0.0079 in.).
50.0
(1.968) 60.0
(2.36) 11.0
(0.433) 5.0
(0.197) 5.0
(7)
(0.197)
(7) Tolerance for this dimension is +0, -0.030 mm (+0, -0.001181 in.).
5.0
(7)
(0.197)
TLP-A070-040
106.7
(4.20)
TLP-A090-075
94.1
(3.70)
8.0
(0.31)
116.5
(4.59) 40.0
(1.57) 25.0
(0.984) 19.0
(0.7480) 90.0
(3.543) 6.60
(4)
(0.260)
70.0
(2.755) 80.0
(3.15) 15.5
(0.610) 6.0
(0.236) 6.0
(7)
(0.236)
6.0
(7)
(0.236)
TLP-A100-100
98.8
(3.89) 153.9
(6.06) 35.0
(1.38) 20.0
(0.787) 16.0
(0.6299) 100
(3.937) 6.60
(3)
(0.260)
80.0
(3.149) 86.0
(3.38) 13.0
(0.630) 5.0
(0.197) 5.0
(7)
(0.197)
5.0
(7)
(0.197)
LB
LE ±50
(2.0 in.)
LP ±50
(2.0 in.)
L-LB
LA
T
D N
P
HD
TP
WK
GD
W
G
LW
Shaft End Details
Shaft
Diameter
S Diameter Holes on
M Diameter Bolt Circle
Dimensions are in mm (in.)
Power Connector Feedback Connector
Pilot Diameter Tolerances
TLP-A046
xx
Motors:
Ø 29.979…30.000 (1.180…1.181)
TLP-A070
xx
Motors:
Ø 49.975…50.000 (1.967…1.968)
TLP-A090
xx
Motors:
Ø 69.970…70.000 (2.754…2.755)
TLP-A100
xx
Motors:
Ø 79.970…80.000 (3.148…3.149)
Key Details
Shaft Diameter Tolerances
TLP-A046
xx
Motors:
Ø 7.991…8.000 (0.3146…0.3149)
TLP-A070
xx
Motors:
Ø 13.989…14.000 (0.5507…0.5512)
TLP-A090
xx
Motors:
Ø 18.987…19.000 (0.7475…0.7480)
TLP-A100
xx
Motors:
Ø 15.989…16.000 (0.6295…0.6299)
Optional Shaft Seal
Refer to page 15
for motor shaft seal
kit information.
Shaft and Pilot Tolerances TLP-A046
xx
TLP-A070
xx
TLP-A090
xx
TLP-A100
xx
Shaft Runout (T.I.R.) 0.02 (0.0008) 0.02 (0.0008) 0.02 (0.0008) 0.02 (0.0008)
Pilot Eccentricity (T.I.R.) 0.04 (0.0016) 0.30 (0.0118) 0.04 (0.0016) 0.04 (0.0016)
Max Face Runout (T.I.R.) 0.04 (0.0016) 0.04 (0.0016) 0.04 (0.0016) 0.04 (0.0016)
Shaft-end Threaded Hole (TP) M3x0.5-6H, 6 M4x0.7-6H, 8 M6x1.0-6H, 10 M5x0.8-6H, 15
On-motor Cable Length (LE/LP) A1 Connector = 1.0 m (39.4 in.), A3 Connector = 300 mm (11.8 in.)