Rockwell Automation Allen-Bradley ControlNet 1786 Series, Installation Instructions Manual, Page: 63 / 74

1 Publication CNET-IN002A-EN-P - December 2001
Appendix
B
Maintain the Cable Strip Tool
What’s in This Appendix
Follow the instructions in this appendix to perform the following tasks
on the cable strip tool, supplied with the ControlNet Coax Toolkit
(1786-CTK):
Reverse/Replace the
Cutting Blades
To reverse or change the cutting blades:
1. Use a screwdriver to lift the memory blade holder and swing it
back.
For information about this topic: See page:
Reverse/Replace the Cutting Blades B-1
Change the Memory Blade Holder B-3
20182-m