Rockwell Automation Allen-Bradley ControlNet 1786 Series, Installation Instructions Manual, Page: 65 / 74

Publication CNET-IN002A-EN-P - December 2001
Maintain the Cable Strip Tool B-3
4. Align the memory blade cartridge (the side with the raised
notches) to the raised area on the inside of the strip tool and
slide the new memory blade cartridge in —
the blades should be
on top as you slide the cartridge in.
5. Swing the memory blade holder closed.
Change the Memory Blade
Holder
You received two memory blade holders with your cable strip tool;
one is for PVC-CL2 cable, and the other is for plenum FEP-CL2P cable.
You need to install the appropriate memory blade holder for the type
of cable you are stripping (PVC or FEP).
1. Lift the latches on the memory blade holder and swing it back.
raised area
raised notch
30031a-m
20069-m
20182-m