Rockwell Automation Allen-Bradley ClearMark 1492-PRINT110, User Manual

Page: 20 / 80

2-2 Rockwell Automation Publication 1492-UM008A-EN-P - June 2010
Chapter 2 Initial Set Up
•
Quick Start Guide
•
ClearMark Printer user manual (this document)
•
ClearTools Software user manual
•
Printer driver and ClearTools software CD
•
Two marker cards (Cat. No. 1492-M5X5)
•
Output rail
Set Up Select a suitable location for the ClearMark printer, considering the following
factors:
•
Place the ClearMark printer on a flat, stable surface larger than the base
area of the printer.
•
The ClearMark printer will not operate properly if it is tilted or at an
angle.
•
Ensure there is sufficient space to allow the marker cards to be ejected
without obstruction from the printer.
•
Avoid installing the ClearMark printer in any location where it is
subject to rapid changes in temperature and humidity.
•
Ensure that the ClearMark printer is not exposed to direct sunlight,
strong light or excessive heat.
•
Avoid locations subject to impact shocks or vibrations. Do not place on
a table joined to other tables to avoid transmission of vibration.
•
Do not install the device in dust-filled surroundings.
•
When installing, ensure that the ClearMark printer is sufficiently
ventilated on all sides.
•
Install the ClearMark Printer near a socket outlet, ensuring that the
plug can be easily removed at all times.
Dimensions of the printer system (including the out-put rail):
•
L x W x H, approx. 50 x 19.7 x 11.8 in. (1270 x 500 x 300 mm)
•
Weight: Approx. 65 lb. (30 kg)
IMPORTANT A LAN cable and extra ink cartridges are not shipped with printer
IMPORTANT
Observe recommended minimum clearance requirements and install
printer on a freely accessible, sturdy, level surface.