4
Rockwell Automation Publication 6300V-IN004A-EN-P - November 2022
Remote Video Link Receiver for 6300B Box PCs and 6300T Box Thin Clients Installation Instructions
Mount your RVL Receiver
Attach the Bracket Kit
A book mount bracket kit, wall mount bracket kit, and a DIN rail mount kit for bottom mount or back mount installation is supplied with your RVL receiver.
Figure 2 - Mounting Bracket Kits and Attachment
1.
See
to identify the correct mounting holes for your selected mounting kit.
2.
Using a 2.5 mm hex screwdriver, hand tighten the screws (supplied) to secure the bracket(s) or DIN rail hook to your RVL receiver.
Secure your RVL receiver
3.
Check that your RVL receiver is level and square.
4.
Mark and drill pilot holes in the wall or shelf.
5.
For book mount or wall mount installation: Insert the M4x20 mounting screws (not provided) through the mounting holes of the bracket and into the pilot holes on
the wall or shelf, then tighten the mounting screws.
For DIN rail bottom mount or DIN rail back mount installation: Attach the DIN rail hook to the DIN rail (not provided).
IMPORTANT
If you will be installing your RVL receiver in an environment where vibration is present, your RVL receiver must be secured to a shelf, wall, or DIN rail
using one of the three mounting kits provided. If vibration is not present and you will not be mounting your RVL receiver to a wall, shelf, or DIN rail,
proceed to
Connect your RVL Receiver on page 5
Bracket
Bracket
Attachment
Wall Mount Bracket Installation
Screws
Hook
Attachment
DIN Rail Hook Installation
Book Mount Bracket Installation
Screws
Hook Attachment
DIN Rail
Hook
Bracket
View of Unit from Bottom
View of Unit from Side
Bracket
Bracket
Attachment
Bracket
Attachment
View of Unit from Bottom
DIN Rail Hook
Profile
View of Unit from Back
DIN Rail
Hook
DIN Rail Hook
Profile
View of Unit from Top
View of Unit from Side
DIN Rail Back Mount
DIN Rail Bottom Mount
Screws
Screws
Screws
