Rockwell Automation Allen-Bradley 2198-E1004-ERS Migration Manual Download

Page: 54 / 75

Rockwell Automation Publication 2198-RM004C-EN-P - March 2022

Chapter 4 Dimensions, Cables, and Wiring

Single-phase Power Wired to Single-phase Kinetix 5100 Drives

, and

illustrate grounded single-

phase power that is wired to single-phase Kinetix 5100 drives when phase-to-
phase voltage is within drive specifications.

Figure 29 - Kinetix 5100 Drive Single-phase (200…230V) Grounded Power Configuration

Figure 30 - Kinetix 5100 Drive Single-phase (120V) Grounded Power Configuration

L1C

L2C

Transformer Secondary

Bonded Cabinet Ground Bus

Ground Grid or Power

Distribution Ground

AC Line

Filter

200…230V AC

Output

Circuit

Protection

Circuit

Protection

Mains AC Input Power
Connector

Control AC Input Power
Connector

2198-E1004-ERS, 2198-E1007-ERS, 2198-
E1015-ERS, and 2198-E1020-ERS
Drives with Single-phase Operation

Reducing the transformer output reduces motor speed. Feeder and branch short-circuit protection is not illustrated.

L1 (Neutral)

L1N

L1C

L2C

Bonded Cabinet Ground Bus

Ground Grid or Power

Distribution Ground

AC Line

Filter

Circuit

Protection

Circuit

Protection

Mains AC Input Power
Connector

Control AC Input Power
Connector

2198-E1004-ERS, 2198-E1007-ERS, 2198-
E1015-ERS, and 2198-E1020-ERS
Drives with Single-phase Operation

Transformer Secondary

120V AC

Output

Summary of Contents for Allen-Bradley 2198-E1004-ERS












































































Search results

Summary of Contents for Allen-Bradley 2198-E1004-ERS

Reviews:

Related manuals for Allen-Bradley 2198-E1004-ERS

Brands by name

Popular brands

Rockwell Automation Allen-Bradley 2198-E1004-ERS, Migration Manual

Search results

Summary of Contents for Allen-Bradley 2198-E1004-ERS

Reviews:

Related manuals for Allen-Bradley 2198-E1004-ERS

Brands by name

Popular brands