background image

Rockwell Automation Support

Rockwell Automation provides technical information on the Web to assist you in using its 
products. At 

http://support.rockwellautomation.com

, you can find technical manuals, a 

knowledge base of FAQs, technical and application notes, sample code and links to software 
service packs, and a MySupport feature that you can customize to make the best use of these 
tools.

For an additional level of technical phone support for installation, configuration and 
troubleshooting, we offer TechConnect support programs. For more information, contact 
your local distributor or Rockwell Automation representative, or visit 
h

ttp://support.rockwellautomation.com

.

Installation Assistance

If you experience a problem within the first 24 hours of installation, please review the 
information that's contained in this manual. You can also contact a special Customer Support 
number for initial help in getting your product up and running.

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when 
shipped from the manufacturing facility. However, if your product is not functioning and 
needs to be returned, follow these procedures.

Allen-Bradley, Rockwell Automation, Micro810, and TechConnect are trademarks of Rockwell Automation, Inc. 
Trademarks not belonging to Rockwell Automation are property of their respective companies.

United States

1.440.646.3434
Monday – Friday, 8 a.m. – 5 p.m. EST

Outside United States

Please contact your local Rockwell Automation representative for any technical 
support issues.

United States

Contact your distributor. You must provide a Customer Support case number (call the 
phone number above to obtain one) to your distributor in order to complete the return 
process.

Outside United States

Please contact your local Rockwell Automation representative for the return 
procedure.

Publication 2080-IN006A-EN-P - September 2010

PN 953203-31

Copyright © 2010 Rockwell Automation, Inc. All rights reserved. Printed in Singapore.

Summary of Contents for 2080-LC10-12AWA

















Reviews: