Rockville TITAN 15, Owner'S Manual

Page: 7 / 26

7
2
LEVEL LEVEL
BT
LEVEL
-10dB – MIC
PWR SIGNAL CLIP
CH 2 THRU
MIX OUT
+4dB – LINE
OUTDOOR
SPEECH
MIC/LINE 1
INPUT
MIC/LINE 2
INPUT
THRU/MIX
AC IN AC OUT
FUSE POWER
220V 110V
10 0 10 0
INDOOR
NORMAL
PAIRING
TWS LINK
10 0
Bluetooth
1
5
7
To connect any Bluetooth capable device, follow the steps listed below.
1. Make sure the TITAN 15 unit's power switch is in the ON position.
2. Turn on the Bluetooth feature on your device and ensure that it is discoverable.
3. Press the PAIRING button for 3 seconds to activate Bluetooth pairing mode. The PAIR-
ING LED will flash slowly.
4. Press the PAIRING button for 1 second. The PAIRING LED will flash quickly.
5. Go to your device's Bluetooth interface and select "TITAN 15" from the list of availa-
ble devices. If pairing is successful, the PAIRING LED will stop flashing and remain lit.
6. Use the BT LEVEL control to adjust the volume of input from the paired Bluetooth device.
7. To end the Bluetooth connection, follow your device's procedure for disconnecting
from a paired device.
Select
3
4
3 SECONDS
1 SECOND
6