7
Operation
Bluetooth Pairing and Operation
1. Press the MODE button until you see “bt” flashing on the display. The unit will automatically enter into pairing mode.
2. Ensure that your device is in Bluetooth mode and discoverable.
3. Find “ROCKVILLE” on your device’s list of available Bluetooth connections and select it.
4. Once successfully paired, the word “bt” will stop flashing and remain solid.
5. You can control playback from your device or you can use the MP3 controls.
Please note:
input from the USB port will override Bluetooth input.
USB/SD Operation
Inserting a USB flash drive or an SD card into the corresponding port/slot will set the RPM109 to USB/SD mode and it will automatically
begin to play music.
Please note:
The RPM109 will not recognize USB drives formatted in the NTFS format. Drives must be formatted in
the FAT or FAT32 formats. Recognized file formats are MP3, WAV, and WMA.
Music Playback
Play button:
quickly press to play/pause current track.
Stop button:
quickly press to stop current track.
Next button:
quickly press to go to next track. Press and hold to raise volume.
Previous button:
quickly press to go to previous track. Press and hold to lower volume.
Folder Selection (USB/SD only)
Play button:
quickly press to play songs in the selected folder.
Stop button:
press for 5 seconds to select desired folder.
Next button:
quickly press to go to next folder.
Previous button:
quickly press to go to previous folder.
Summary of Contents for RPM109
Page 1: ......
Page 2: ......
Page 3: ......
